Products

SensorFog F Smoke System

Indoor smoke device with siren.

The device connects to any alarm control panel as it only uses three connection signals.

These are: alarm, system status and empty cartridge notification.

The first two are inputs for the device and signal the current status of the alarm and of activation to it.

The third notifies the connected central unit about the status of the smoke cartridge.

The smoke generator also has an on-board infrared sensor so smoke is discharged only after dual signalling, to avoid false alarms.

SensorFog F Smoke System

Indoor smoke device with siren (optional).

The device connects to any alarm control panel as it only uses three connection signals.

These are: alarm, system status and empty cartridge notification.

The first two are inputs for the device and signal the current status of the alarm and of activation to it.

The third notifies the connected central unit about the status of the smoke cartridge.

The smoke generator also has an on-board infrared sensor so smoke is discharged only after dual signalling, to avoid false alarms.

SensorFog R Smoke System

The “SensorFog R” smoke system is suitable for combining with any alarm system that has at least one wired output.

It is suitable for any type of residential system.
“SensorFog” smoke generators are equipped with an on-board IR sensor and monitor independently.

SensorFog S Combined Smoke System

Independent mini alarm system, i.e. doesn’t need a connected alarm control unit.

This feature makes it particularly attractive for single-area installations and smaller environments to protect.

For example:

  • Garages
  • Cellars
  • Shops
  • Boats
  • Campers/caravans

SensorFog S Combined Smoke System

Independent mini alarm system, i.e. doesn’t need a connected alarm control unit.

This feature makes it particularly attractive for single-area installations and smaller environments to protect.

For example:

  • Garages
  • Cellars
  • Shops
  • Boats
  • Campers/caravans

Technical Information

Inputs

System status – Wired Alarm

Outputs

Dialer – Anti-tampering – Empty cartridge notification

Blue pre-alarm LED light:

Emits a series of flashes for the duration of the time interval between the first alarm detected and the confirmation alarm. It switches off automatically at the end of the pre-alarm time (15 minutes)

Cartridge triggered yellow LED light:

Emits a brief flash when the chemical reaction that starts the smoke discharge is triggered

Reminder red LED light alert:

Remains lit to notify of empty cartridge.

There is a small validation chip on the motherboard with a red LED light that detects whether the cartridge is original to ensure correct operation.

Every time the smoke cartridge is replaced, the validation chip must also be replaced.

More Details

Are you an installer requiring technical information? Are you a retailer requiring info on costs and supplies?

Write to us and our staff will contact you as soon as possible.

Email info

Would you like to contact us directly via email?

info@securfog.com







//]]>